Readme.rtf       Date 2019/05/01

BlackWood Systems, Inc.
14201 N 87th Street - Suite C-131
Scottsdale, AZ  85260

phone: 602-569-8766
fax:   480-905-8778
email: support@blackwood-systems.com
web:   www.blackwood-systems.com

This file contains the latest version and upgrade information. This file is the first place to look for initial installation and upgrade information.

Please thoroughly read and agree to the License.txt file before using this software.

For an initial install, further in this document the section entitled "FIRST INSTALLATION" describes the installation process from start to finish.

Sections in this document

Compatibility between client and server
Special Notes
CURRENT VERSIONS
NEW FEATURES / BUGS FIXED
CLIENT INSTALLATION NOTES
mini-MOMI
MULTIPLE PLATFORM SERVER SUPPORT
FIRST INSTALLATION
UPDATE AN EXISTING INSTALLATION
RUNNING SSMOMI SCREEN SAVER AS A STAND ALONE PROGRAM
MANUAL INSTALLATION OF NONSTOP BASED PROGRAMS
FUTURE PLANS
Directory layout

Compatibility between client and server

The ability of our customers to upgrade as painlessly as possible to a new MOMI release is important to us.

Our standard release migration recommendation is to upgrade the server first and the client second within a release series (i.e. 4.xx, 5.xx and 6.xx). Normally, when a release series changes, both the client and server must both be upgrade at the same time. However, a 5.xx client will operate with MOMI 6.xx.

Please check below for Oldest client version	tested with server.

Note that not all features may operate when running a combination of old and new MOMI software.

Special Notes

The PC must be configured with at least 24-bit color for the client to operate fully with MOMI. A warning message is displayed at client startup if a lower color depth is detected. While the client will generally function correctly with a lower color depth, certain features are not available such as the pop-up window when the mouse is placed over the connector lines between systems on the screen SubSystems / Expand / Diagram.

The CAIL Emulator was provided courtesy of CAIL and is not a component of any purchased MOMI product. The Emulator is no longer provided and was removed from the MOMI installation package.
 
The IP Workshop Pro TCP/IP Subnet calculator is provided courtesy of Peter Kostov and Peko Software and is not a component of any purchased MOMI product. BlackWood Systems and Peko Software reserves the right to discontinue, limit or alter the availability in future releases. Please see the IP Workshop Pro help within the calculator for additional information and to check out other tools he has available.

CURRENT VERSIONS
   
Release Package	6.03
   Release Date (yyyy/mm/dd)	2019/05/01

	item	Version
	----	-------
	Latest O/S tested	G06.32.01 - H06.29.00
	J06.22.00 – L18.08.01
	
	Client Version	6.03
	Server Version (VPROC)	6.03   T0000G06___V6_03____2019_04_22
      
	Buffer Version	Client 21.57   Server 21.57
	History database	3.10
	CONFMOMI	6.01
	OBYMOMI	5.02
	OBYCSQL	5.02
	MomiFTP.exe	2.13
	ssMOMI.scr	6.00
	MomiEMail.exe	1.10
	SendMail.exe	1.01
	IPCalc.exe	1.3.3

	Oldest client version
	tested with server	5.80

NEW FEATURES / BUGS FIXED 
(see MOMI HISTORY.RTF for previous versions)

Common new features (requires current client and server)
If you are using Client Access, newly added screens in a MOMI release update are not available to users by default. This action may be changed on the screen Configure / Client Access / Global Settings by checking the option New screens enabled by default. The user that started MOMI, known as the “Default Security User” always has new screens enabled by default.  

Impacts in this version
The Free version of the CAIL emulator is no longer provided with the MOMI client. If the user has the full-function purchased version installed it will continue to work. If the user has any 6530 Emulator programs on their PC that they want to start from within the MOMI client, the Systems / External screen will allow a button to be created to start their emulator.

MOMI Software short-cuts, as displayed by the Windows Start menu, now use the format of BWS MOMI n.nn. Previously, MOMI software short-cuts were located under BlackWood Systems. This change is for compatibility with Windows 10 which does not handle multiple levels within the Start menu.

MOMI Client
	New Screens: 	
·		None 

	New Features:
·		None 

	Bug Fixes:
•	When changing screens if the screen being displayed was not finished building and the user changed to another screen, the Back and Forward screen history and the screen specific help page may have been incorrect. Fixed.
•	Systems / File Transfer / SFTP
- If the default user location defined on the Nonstop for the user was a OSS location not a NSK location the client would change to the OSS location until the user manually changed it to a valid NSK Vol/SubVol.  Now a error is displayed and the user must set location. Fixed.
•	Overview
- EMS Msgs grid would not always resize the columns and rows to fit a changed font size. Fixed.
•	Alarms / Define / Alarm
•	- Sometime after a Limit by Type was inserted the cursor would not position correctly. Fixed.
•	Alarms / Define / EMail Group
•	- Save New and Change did not update users into group. Bug introduced in version 6.00. Fixed.
•	
•	Misc. Items:
•	·	More Improvements on resizing.
•	SubSystems / Expand / Path
•	- Added following fields:
•	  - Info   - L4 CwndClamp
•	  - Status - SuperPath
•	  - Stats  - Current Recv Queue Messages
•	           - Max Recv Queue Messages
•	           - Level 4 Message size Histogram
•	               - <= 32K
•	               - <= 60K
•	               - <= 256K
•	               - <= 1M
•	               -  > 1M
•	Configure / Client Access / User Define / Configure
 - Added ability to hide/show Server 'Client Connections' and Server 'TraceLog'

	Known issues:
•	When using Windows 7 and a 4K monitor and the client is resized to full screen, the down-arrow on a dropbox is very small.  They do not resize like other items. It works fine with Windows 10.
•	When converting from Mini-MOMI to full MOMI it may be necessary to restart the client.
•	Systems / File Transfer / SFTP
 - If file is transferred as a Key-Sequenced structured file sometimes SFTP will think the transfer is successful but the host file is left empty.  A check is now done and an error shows if this happened. Note: Sometimes making the REC LEN even will succeed. Some failures are caused by unknown factors and seem to be a failure in the SFTP Server on the NonStop.
•	SubSystems / Discovery
•	- Feature is still under development and subject to change. 
•		Comments and suggestions are invited and welcome.

MOMI Server
	New Features:
·	Storage will now report Optical and SSD. Previously, both types were reported as magnetic, which is the default for unknown types (Ken K.).

·	The protocols IP, ICMP, IPv6 and RAW can now be reported from CLIMs. The server also now provides a larger field when reporting the protocol (the old field was limited to three characters).

 	Bug Fixes:
·	The display of an EMS event now reports the CPU and PIN of the originating process when it writes directly to $0 (versus a formatted EMS event). Previously, $0 was reported as the originator.  

	Misc. Items:
·	Display of a spooler job will now indicate if a job was abnormally closed instead of a generic error. Any spool job data available is still displayed. 

	Known Issues:
·		None 

MOMIFTP 
·	Put in check to make sure user default location is not in OSS location and added some resizing improvements.	

ssMOMI 
·	None	

MomiEmail 
·	None	

SendMail 
·	None	

IPCalc 
·	None

CLIENT INSTALLATION NOTES

Installation of the PC client via setup requires logon as the PC administrator. A Windows security failure during setup usually means it is necessary to right-click and select Run as administrator to gain Admin rights, which is a level above Administrator.

The setup launcher has an alternate installation option of copying MOMI files to a shared network location.  

mini-MOMI

MOMI provides the ability to operate in a reduced functionality or lite mode. This mode is automatic whenever MOMI is started without a password. To install mini-MOMI, follow the installation instructions but omit a password in the CONFMOMI file.

Mini-MOMI will operate for 2-years from the version date of the NonStop server portion of the program. The expiration date is displayed on the PC Client screen Configure / Diagnostics.

Shops running mini-MOMI are encouraged to check our web site from time-to-time for new versions, updates or a mini-MOMI password.

While it is our intention to provide mini-MOMI in future versions, BlackWood reserves the right to alter, limit or discontinue mini-MOMI in subsequent releases.

MULTIPLE PLATFORM SERVER SUPPORT

MOMI configuration files support S-Series, NonStop Integrity, NonStop Blades and Integrity NonStop X.

On the NonStop system, in the subvolume where MOMI is installed, the following object files are present by default:

   BWMOMI		- 32-bit TNS/R native (S-Series)
   BWMOMIi	- 32-bit TNS/E native (Integrity & Blades)
   BWMOMIx	- 32-bit TNS/X native (Intel X64 & Virtual NonStop)

The TACL obey files OBYCSQL, used to SQL/MP compile MOMI objects, and OBYMOMI, used to start the MOMI subsystem, automatically select the correct object file.

If automatic platform selection logic does not function, the error Illegal program file format is encountered, simply change the obey files to reference to the correct BWMOMI? object.

FIRST INSTALLATION
UPDATE AN EXISTING INSTALLATION

If you are installing MOMI for the first time, or updating an existing installation of MOMI, this section will walk you through 1) installing MOMI on the PC, and 2) installing MOMI on the NonStop System.

Installing MOMI software to the local PC requires Administrator access under Windows. 

1)	If you need MOMI software, download the latest version of MOMI from our web site.

2a) If you downloaded an EXE file:

a. double click on the downloaded file

2b) If you downloaded a ZIP file:

a. expand the ZIP file to an empty subdirectory on your PC

     b. double click on the file Launcher.exe

2c) If you have a MOMI DVD / Flash Drive:

a. double click on the file Launcher.exe

3)	Once the installation process starts your given the options to a) Install the MOMI Client, b) Install the MOMI Server files on NonStop Server, c) Copy MOMI client files to common server location, or d) View ReadMe file for MOMI. Select Install MOMI Client. A logon prompt may occur for administrator. Click though the initial and Welcome screen. Please read and accept the license agreement.

4)	The next screen is Choose the Destination Folder, or location, where the MOMI files on the PC are to be installed (default recommended). By default, each version of MOMI installs into its own version specific subdirectory.

5)	The next screen selects the Setup Type. Choose Complete Installation.

6)	Choose the name of the program group for shortcut on the Start menu (default recommended). By default, each version of MOMI creates its own version specific shortcuts.

7)	Click Next to begin the installation (which may take some time).

8)	Click finish.

9)	The program MomiFTP is automatically started and will perform the FTP or SFTP transfer of files from the PC to the NonStop.

On the 1st Connect to NonStop page, select the transport type, fill in the Host Address (your NonStop IP address), User ID, password and initial Volume/Subvolume where the MOMI files are placed. The User ID specified owns the files once the transfer takes place. Press Connect. If the connection was successful, you will see a big green "Connected..." .

Press Next >>> to advance the screen.

On the 2nd Select Vol/SubVol on NonStop screen shows a list of the files present in the selected location. Change the location if desired and press Change.

Press Next >>> to advance the screen.

On the 3rd Select New Install or Update screen press Put Files on NonStop. The status boxes indicate the outcome of the transfer.

Press the Exit button to disconnect and stop the program.

10)	From a TACL terminal emulator, Logon with the User ID and password to operate $MOMI. Volume to the location where the MOMI files were placed.

11)	Edit the file OBYMOMI. This is a TACL obey file used to start MOMI and provide initial configuration information. Page down to the section "set values below here". This marked portion of the obey file is the place to change initial startup values for MOMI.

Check the process name, CPU $MOMI operates in, priority and home terminal. The default values are good for most systems.

12)	Edit the file CONFMOMI. This edit file is used to set various MOMI attributes using keywords. Set the System-description and check the TCP/IP process name and port that MOMI will 'listen' on for PC client connections.

mini-MOMI users, the above should be about the only items of concern.

MOMI users, add your MOMI password. Also, define any history files desired. MOMI automatically creates the history files in the location specified.

13)	SQL/MP compile MOMI (if you don't have SQL/MP, ignore this step):

From a TACL prompt: OBEY OBYCSQL

14) Create a Super Group helper program (the steps below omit logon to the super.* ID):

Purge BWSSG2

Rename BWSSG1, BWSSG2

Rename BWSSG, BWSSG1

FUP DUP BWMOMI, BWSSG, sourcedate			(BWMOMIi or BWMOMIx)

FUP GIVE BWSSG, <super.group>					 

FUP SECURE BWSSG, NGNG, PROGID

An existing BWSSG must be updated any time BWMOMI is updated.
(The FUP DUP option of SOURCEDATE or SAVEALL must be used)

15)	Start MOMI:

    From a TACL prompt: OBEY OBYMOMI

    (wait at least 1 minute before proceeding to the next step)

16)	On your PC, start the PC MOMI client (Start/ALL Programs/BlackWood Systems/MOMI_n.nn/MOMI). The MOMI client will detect an initial start on the PC and will prompt for the TCP/IP address of the NonStop and port. The port is defined in the CONFMOMI file and has a default of 2010.

Note that these instructions may reoccur in other portions of this document or provide optional installation methods.

RUNNING SSMOMI SCREEN SAVER AS A STAND ALONE PROGRAM

Some users have requested the ability to run the ssMOMI screen saver as a standalone program that does not stop when the screen is clicked or the keyboard is pressed.

To run ssMOMI as a standalone program:

1)	Copy the MOMI screen saver ssMOMI.scr giving it the name ssMOMI.exe.

2)	Start the program as follows:

ssMOMI.EXE /c AsEXE

3)	A pop-up window displays. Select the location of your MOMI.INI file. By default this is located at:

C:\Documents and Settings\<user>\Application Data\BlackWood Systems\MOMI

4)	After pressing OK, the screen saver appears. Press X to close.

5)	Create a Shortcut with the Target as follows:

ssMOMI.EXE AsEXE

(path details to the EXE omitted)

The run-time param /c directs the program to display a pop-up window to configure the location of the MOMI.INI. AsEXE directs the program to continue executing after keys are pressed (i.e. don’t function as a screen-saver).

MANUAL INSTALLATION OF NONSTOP BASED PROGRAMS

If the MOMIFTP utility cannot be used to transfer files from the PC to the NonStop server, these instructions describe how an alternate file transfer program would be used. The MOMIFTP utility does not perform any 'special' actions, but simply renames files (if existing are present) and transfers MOMI files from the PC to the NonStop System using FTP or SFTP.
 
The first step is to locate the source files. If MOMI is installed on the PC the files are located by default at:

C:\Program Files (x86)\BlackWood Systems\MOMI_n.nn\Tandem Install\NonStop\
 			
(where n.nn is the release package number)

If you have the MOMI download ZIP from our website expand the files to an empty subdirectory and look for the subdirectory \NonStop Install. The MOMI DVD files are in the same subdirectory name.

Note that under the subdirectory \NonStop there are two additional directories \Ascii and \Binary. This grouping indicates the file transfer mode (i.e. ASCII or Binary).

The second step, using a file transfer utility, copy files from the PC to the NonStop (all to the same destination subvolume) -

Binary

 				BWMOMI
 				BWMOMIi
BWMOMIx
 				EMSEXPO

ASCII

  			FUPEVTCX
OBYMOMI
CONFMOMI
OBYCSQL
OBYALTER

The third step is to logon to the NonStop System, volume to the location where the files were placed and OBEY the TACL obey file OBYALTER to alter the file codes (or manually perform the steps below):

			a) FUP alter BWMOMI		,code 700
b) FUP alter BWMOMIi	,code 800
c) FUP alter BWMOMIx	,code 500
d) FUP alter EMSEXPO	,code 845

At this point the files are transferred. Continue the instructions in the section First Installation / Update an existing installation after the step using MOMIFTP.

FUTURE PLANS (may or may not be in future releases)

		1) CMON   
		2) More history chart-able entities
		3) New functionality as requested by our users
		4) Additional Tools and References as we think of them
		5) Pathway information

We welcome comments, suggestions and bug reports. Please send them to:

support@blackwood-systems.com

*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

The MOMI DVD / Flash Drive or EXE files follow the same general layout.  

The following is the general file layout and purpose for each file:

Documents									= Directory of documentation
		License.rtf      			=		MOMI disclaimer/license
		License.txt      			=		MOMI disclaimer/license
  	MOMI History.rtf 			=		Change history
		Readme.rtf       			=		This file	(<<<---START HERE)

Extras             			= Directory of Optional Programs
ssMOMI.SCR          	=		MOMI Screen saver
   
Help               			=	Directory of Help files
		HTML5										=		Directory of HTLM5 style help
		Microsoft_HTML_Help 	=		Directory of CHM style help			
		WebHelp	         			=		Directory of Web style help
		MOMI_User.doc						=		Help in Word format
		MOMI_User.pdf						=		Help in Adobe PDF format

	NonStop Install    			=	Directory for Setting up NonStop
NonStop 								=		Directory of NonStop software
				ASCII								=			Directory of Ascii files
					CONFMOMI						=				Initial configuration file
					FUPEVTCX						=				FUP obey file to create EVENTCX file
					OBYALTER						=				TACL obey file to alter file codes
					OBYCSQL						= 			TACL obey file to SQL compile MOMI
					OBYMOMI						=				Startup obey file
				Binary								=			Directory of Binary files
					G06.29-and-later	= 			optional use if G06.29 or later
						BWMOMI						= 				MOMI Server (TNS/R native code 700)
					Pre-H06.05				=				optional use on pre-H06.05
						BWMOMIi				 	=					MOMI Server (TNS/E native code 800)
					BWMOMI     			 	=				MOMI Server (TNS/R native code 700)
					BWMOMIi					 	=				MOMI Server (TNS/E native code 800)
					BWMOMIx					 	=				MOMI Server (TNS/X native code 500)
					EMSEXPO					 	=				Compiled EMS filter (code 845)
MomiFTP.EXE					 	=			FTP MOMI files to NonStop System
			TanFiles							 	=			MomiFTP.EXE config database

   PC Manual Install 			=	Directory for Manual Install
			CAIL										=		Directory containing CAIL Emulator
			Documents							=		Directory of documents
			Extras									=		Directory of optional programs
			Help										=		Directory of Help formats
			Misc_Sounds						=		Directory of misc. sound files
			Sounds									=		Directory of MOMI sound files
			Tandem Install				=		Directory for Setting up NonStop
			Calendar.new					=		MOMI calendar database
			ErrorCodes.mom				=		MOMI system supplied error database
     MOMI.EXE								=		MOMI client
   		Readme.rtf						=		Readme instructions (<<<---START HERE)
     TimeZone.mom					=		MOMI time zone database

		Launcher.exe						= Program allowing user to select install options
   CentralServer.exe     = Program that copies Client files to central PC       Server
		Readme.rtf							= This file
		MOMI_Client.exe				= MOMI Client Installation program